News » hoverboard supplier

Detailed charging procedure

Charging notes Your Hoverboard should arrive partially charged and ready to go. Once you have had an initial play, it’s a good idea to give it a full charge until the charge light goes green. The board can take 2-3 hours to fully charge, but will often be less, depending on the state of the battery when you plug it in. It can also take more than 3 hours but this is rare. Once the light on your charger turns from red to green, the board is fully charged and you should unplug the board and unplug the charger from the wall. Our hoverboards come with a  UL CUL certified charging unit and we go to great lengths to ensure...

Read more →


Getting On and Off Your Hoverboard

Getting ON Your Hoverboard: Place the Hoverboard on level ground in front of you. Turn the Hoverboard on and make sure the Battery Level Light is green (indicating the unit is charged). Using your dominant foot step forward and place your foot lightly onto the Hoverboard. Stabilize the Hoverboard by finding the correct balance with your dominant foot. Once you have stabilized the Hoverboard begin to shift your weight to your dominant foot and quickly bring your other foot onto the Hoverboard. Stabilize yourself.   Getting OFF the HOVERBOARD: Bring the Hoverboard to a complete stop. Using your dominant foot, angle your toes slightly downward to prevent the Hoverboard from moving backward. Quickly step backward with your non-dominant foot and place...

Read more →


My Bluetooth isn’t working

No Sound at all New / Unused board If the board is brand new and there is no sound coming from the speaker when you switch the board on, it can be one of the following issues: The speaker wire has become detached from the Bluetooth unit. This is a small connector clip that can be pushed back onto the circuit board, but requires removing the bottom shell. The speaker is faulty. The Bluetooth unit is faulty. Used board In addition to the above issues, which can happen due to a knock or could be just due to a fault developing while in use. Sometimes if the board has had a knock the Bluetooth circuit board can become dislodged inside the...

Read more →


What does the Interior of a hoverboard look like?

You always see a good looking board that has a beautiful cover of your preferred color, but you have never seen the inside structure. Have this opportunity to have a look at the interior fabric of an electronic scooter. Below is a detailed picture showing the internal parts of an electric scooter. These are the internal features •    Steel frame with a central pivot•    Logic board•    Two tilt/speed sensors•    Charging port•    Two gyroscopes•    Two infrared sensors•    Two electric motors•    Power switch•    A battery pack•    LED lights•    Pressure pads•    A plastic shell Q1 How does a hoverboard move? The movement of a hoverboard is facilitated by the wheel sensor, speed controls board, main logic board, and the battery pack The Wheel Sensor The...

Read more →


UL Certification Info

Shop With Confidence! If you have been searching for a safe, tested, and certified hoverboard for your child, or even your own personal use, then now is your chance to buy one. Purchase your board with confidence, knowing that it has been tested by a well respected, top rated consumer safety commission that is in charge of testing electronics for the entire country to ensure safety and top of the line manufacturing. What does it mean to be UL Listed? “UL Listed means that UL has tested represented samples of the product and determined that it meets UL’s Requirement’s These requirements are based primarily on UL’s published and nationally recognized Standard for Safety. References to UL and the UL listing...

Read more →